PANDUAN ADJUSTMENT UTTP ELEKTRONIK

2. Maintenance Mode

2.1. SPAN Switch and Software Version Check

1 - ZERO 2 - NET

3 - MEMORY 4 - BATTERY

OPERATION	WEIGHT	U.PRICE	T.PRICE	1	2	3	4	5	REMARKS
	0.0 0 0	0. 0 0	0.0 0						Weighing mode.
[RE-ZERO]	8 8 8 8 8	8 8 8 8 8	8 8 8 8 8 8						Enter 2 8 4 while pressing
[RE-ZERO] + [2] [8] [4]	S t E 0 8	V r x. x x	S - O N						[RE-ZERO].
									S-ON display when SPAN switch is set to enable. Can access to 142 and calibration mode.

	S t E 0 8	V r x. x x	S - O F F						S-OFF display when SPAN switch is set to disable. No access to 142 and calibration mode.

	0.0 0 0	0.0 0	0.0 0						Goes back to Weighing mode after 3 seconds display.

2.2. SPAN Adjustment ( CALIBRATION )

1 - ZERO 2 - NET

3 - MEMORY 4 - BATTERY

OPERATION	WEIGHT	U.PRICE	T.PRICE	1	2	3	4	5	REMARKS
Press and Hold CAL Mode switch, there is under scale	0.0 0 0	0. 0 0	0.0 0						Weighing mode.
[RE-ZERO]	8 8 8 8 8	8 8 8 8 8	8 8 8 8 8 8						Enter 8 7 1 5 while pressing
[RE-ZERO] + [8] [7] [1] [5]	C A L 0 0								[RE-ZERO].
Ensure no weight on platter, [RE-ZERO]	- - - - -								Calibrating zero point.
:
:
:
Put full capacity weight on platter	C A L S P
(e.g. 15kg), [RE-ZERO]	- - - - -								Calibrating Span.
After calibration	1 5.0 0 0	0.0 0	0.0 0						Goes back to Weighing mode.

2.3. Escape from Maintenance mode

1 - ZERO 2 - NET

3 - MEMORY 4 - BATTERY

OPERATION	WEIGHT	U.PRICE	T.PRICE	1	2	3	4	5	REMARKS
	0.0 0 0	0. 0 0	0.0 0						Weighing mode.
[RE-ZERO]	8 8 8 8 8	8 8 8 8 8	8 8 8 8 8 8						Enter 8 7 1 5 while pressing
[RE-ZERO] + [8] [7] [1] [5]	C A L 0 0								[RE-ZERO].
[T]	0.0 0 0	0. 0 0	0.0 0						Escape to Weighing mode.

[RE-ZERO]	8 8 8 8 8	8 8 8 8 8	8 8 8 8 8 8						Enter 8 7 1 5 while pressing
[RE-ZERO] + [8] [7] [1] [5]	C A L 0 0								[RE-ZERO].
Ensure no weight on platter, [RE-ZERO]	- - - - -								Calibrating zero point.
:
:
	C A L S P
[T]	0.0 0 0	0. 0 0	0.0 0						Escape to Weighing mode.

Rabu, 26 September 2012